27
FEATURES AND CONTROLS
Switches
Headlight Switch
Use the headlight switch to turn the lights on and
off and to change the lights from high beam to low
beam. The ignition switch must be in the ON posi-
tion to operate the headlights.
Press the top of the rocker switch toward the dash
to place the headlights on high beam. Move the
rocker switch to the center position to place the
headlights on low beam. Press the bottom of the
rocker switch to turn off the headlights.
All Wheel Drive (AWD) Switch
The AWD Switch has two positions:
• All Wheel Drive (AWD)
• Two Wheel Drive (2WD).
Press the top of the rocker switch to engage All
Wheel Drive. Press the bottom of the switch to
operate in two wheel drive.
See page 36 for AWD operating instructions.
Electronic Power Steering (EPS)
Electronic power steering (if equipped) engages when the ignition key is
turned to the ON position. EPS remains engaged whether the vehicle is
moving or idle.
The EPS warning indicator briefly illuminates when the key is turned to
the ON position. See page 38.
To conserve battery power, the EPS will shut down 5 minutes after the
engine is stopped if the key remains in the ON position. The EPS
warning indicator will illuminate to indicate the EPS has shut down.
If the light remains on after starting the engine, the EPS system is inop-
erative. See your authorized POLARIS dealer for service.
HIGH
LOW
AWD
2WD
