background image

28

FEATURES AND CONTROLS

Seats

Before operating the vehicle, always push down on all seat backs to 
ensure the latches are secure.

Seat Adjustments

Loosen (do not remove) the four screws located on the seat bottom. 
Slide the seat forward or rearward to the desired position. Tighten the 
screws to 4 ft. lbs. (5.4 Nm). Do not overtighten.

Seat Removal

1. Pull up on the seat latch 

lever located under the rear 
edge of the seat.

2. Tilt the seat forward.

3. Lift the seat upward to 

remove it from the vehicle.

4. Reverse this procedure to 

reinstall the seat. Make 
sure the seat tabs at the 
front edge of the seat slide 
under the seat retainer bar.

5. Press down firmly at the 

rear of the seat to engage 
the rear latch.

Steering Wheel

The steering wheel can be 
tilted upward or downward 
for rider preference.

Lift and hold the steering 
wheel adjustment lever 
while moving the steering 
wheel upward or down-
ward. Release the lever 
when the steering wheel is 
at the desired position.

Front Seat 

Retainer

Seat 

Latch

Adjustment Lever

Summary of Contents for 2014 RZR 9002014 RZR 4 900


























































































































































Reviews: