Polaris 2011 600 IQ Shift Owner'S Manual Download Page 93

Page: 93 / 142

MAINTENANCE

Spark Plug Removal and Replacement

1. Remove the spark plug cap.

2. Using the special wrench provided in

the tool pouch, rotate the spark plug
counterclockwise to remove.

3. Reverse the procedure for spark plug

installation.

4. Torque to 18-22 ft. lbs. (24-30 Nm).

5. Reinstall the spark plug cap.

Oil Lines

Inspect oil line condition every 1000 miles (1600 km).

Oil Filter

The oil filter is located at the side of
the oil tank. Have your dealer change
the oil filter and bleed the system
annually or every 1000 miles (1600
km).

TIP:

The direction of the arrows indicates

the direction of flow through the fil-

ter.

Summary of Contents for 2011 600 IQ Shift















































































































































Search results

Summary of Contents for 2011 600 IQ Shift

Reviews:

Related manuals for 2011 600 IQ Shift

Brands by name

Popular brands

Polaris 2011 600 IQ Shift, Owner'S Manual

Search results

Summary of Contents for 2011 600 IQ Shift

Reviews:

Related manuals for 2011 600 IQ Shift

Brands by name

Popular brands