Polaris 2008 Scrambler 500 4X4 Owner'S Manual Download

Page: 92 / 129

MAINTENANCE

Lights

Taillight/Brakelight Lamp Replacement

If the taillight/brakelight does not work the lamp may need to be

replaced.
1. Remove the taillight lens cover

mounting screws. Remove the

lens cover and gasket and set

aside for reassembly.

2. Remove the lamp (1).
3. Apply dielectric grease to the

socket and install the new

lamp.

4. Test the taillight/brakelight for

proper operation.

5. Reinstall the gasket and lens cover.

Indicator Lamp Replacement

1. Remove the instrument panel, if necessary, to access the back of

the indicator panel.

2. Using a small, straight-blade screwdriver, turn the base of the bulb

1/4 turn counterclockwise.

3. Using a needle-nose plier or similar tool, pull the lamp out of the

indicator panel housing.

4. Insert the new bulb and seat it by turning it 1/4 turn clockwise.
5. Reinstall the instrument panel if removed.

Summary of Contents for 2008 Scrambler 500 4X4


































































































































Search results

Summary of Contents for 2008 Scrambler 500 4X4

Reviews:

Related manuals for 2008 Scrambler 500 4X4

Brands by name

Popular brands

Polaris 2008 Scrambler 500 4X4, Owner'S Manual

Search results

Summary of Contents for 2008 Scrambler 500 4X4

Reviews:

Related manuals for 2008 Scrambler 500 4X4

Brands by name

Popular brands