Polaris 2008 Scrambler 500 4X4 Page 15 Owner'S Manual Download

Page: 15 / 129

SAFETY

Operator Safety

WARNING

POTENTIAL HAZARD
Carrying a passenger on an

ATV.
WHAT CAN HAPPEN
Carrying a passenger

greatly reduces the

operator’s ability to balance

and control the ATV, which

could cause an accident

and injury to the

operator and/or passenger.
HOW TO AVOID THE HAZARD
Never carry a passenger. The purpose of the long seat is to

allow the operator to shift position as needed during operation. It

is not intended for carrying passengers.

WARNING

POTENTIAL HAZARD
Operating an ATV

on paved

surfaces, including

sidewalks, paths,

parking lots, and

driveways.
WHAT CAN HAPPEN
ATV tires are designed for

off-road use. Operating on

paved surfaces may

seriously affect the handling and

control of the ATV and could result in loss of control, accident,

and/or injury.
HOW TO AVOID THE HAZARD
Avoid operating the ATV on pavement. If it’s unavoidable, travel

slowly and avoid sudden turns or stops.

Summary of Contents for 2008 Scrambler 500 4X4


































































































































Search results

Summary of Contents for 2008 Scrambler 500 4X4

Reviews:

Related manuals for 2008 Scrambler 500 4X4

Brands by name

Popular brands

Polaris 2008 Scrambler 500 4X4, Owner'S Manual

Search results

Summary of Contents for 2008 Scrambler 500 4X4

Reviews:

Related manuals for 2008 Scrambler 500 4X4

Brands by name

Popular brands