Polaris 2007 Outlaw 525 Page 40 Owner'S Manual Download

Page: 40 / 220

Safety

Operator Safety

WARNING

POTENTIAL HAZARD
Turning improperly.
WHAT CAN HAPPEN
Improper turns could cause loss of control

and lead to a collision or overturn.
HOW TO AVOID THE HAZARD
Always follow proper procedures for turning

as described in the owner's manual. Practice

turning at slow speeds before attempting to

turn at faster speeds.Never turn at excessive

speed.

WARNING

POTENTIAL HAZARD
Improperly operating in reverse.
WHAT CAN HAPPEN
The ATV could collide with an obstacle or

person, resulting in severe injury.
HOW TO AVOID THE HAZARD
Before shifting into reverse gear, always

check for obstacles or people behind the ATV.

When it's safe to proceed, back slowly.

Summary of Contents for 2007 Outlaw 525





























































































































































































































Search results

Summary of Contents for 2007 Outlaw 525

Reviews:

Related manuals for 2007 Outlaw 525

Brands by name

Popular brands

Polaris 2007 Outlaw 525, Owner'S Manual

Search results

Summary of Contents for 2007 Outlaw 525

Reviews:

Related manuals for 2007 Outlaw 525

Brands by name

Popular brands