Polaris 2007 Outlaw 525 Page 26 Owner'S Manual Download

Page: 26 / 220

Safety

Operator Safety

Equipment Modifications

We are concerned for the safety of our customers and for the general public. Therefore, we

strongly recommend that consumers do not install on a Polaris ATV any equipment that may

increase the speed or power of the vehicle, or make any other modifications to the vehicle for

these purposes. Any modifications to the original equipment of the vehicle create a substan-

tial safety hazard and increase the risk of bodily injury.
The warranty on your Polaris ATV is terminated if any equipment has been added to the

vehicle, or if any modifications have been made to the vehicle, that increase its speed or

power.

NOTE:

The addition of certain accessories, including (but not limited to) mowers, blades, tires, spray-

ers, or large racks, may change the handling characteristics of the vehicle. Use only Polaris-

approved accessories, and familiarize yourself with their function and effect on the vehicle.

Summary of Contents for 2007 Outlaw 525





























































































































































































































Search results

Summary of Contents for 2007 Outlaw 525

Reviews:

Related manuals for 2007 Outlaw 525

Brands by name

Popular brands

Polaris 2007 Outlaw 525, Owner'S Manual

Search results

Summary of Contents for 2007 Outlaw 525

Reviews:

Related manuals for 2007 Outlaw 525

Brands by name

Popular brands