Polaris 2007 Outlaw 525 Page 156 Owner'S Manual Download

Page: 156 / 220

153

Maintenance

Wheel Installation

1. Place the transmission in gear. Lock the parking

brake.

2. Place the wheel on the wheel hub with the valve

stem toward the outside and rotation arrow on the

tire pointing toward forward rotation.

3. Install the wheel bolts and finger tighten them.
4. Lower the vehicle to the ground.
5. Securely tighten the bolts to specification.

See

page 152.

WARNING

Improperly installed wheels can adversely affect tire wear and vehicle handling, which can result in

serious injury or death. Never install the rim with the valve stem to the inside of the vehicle. Always

ensure that all nuts are torqued to specification.

Valve

Stem

Summary of Contents for 2007 Outlaw 525





























































































































































































































Search results

Summary of Contents for 2007 Outlaw 525

Reviews:

Related manuals for 2007 Outlaw 525

Brands by name

Popular brands

Polaris 2007 Outlaw 525, Owner'S Manual

Search results

Summary of Contents for 2007 Outlaw 525

Reviews:

Related manuals for 2007 Outlaw 525

Brands by name

Popular brands