Inspection before installation
Fastening holder
Crosspiece
Post - (metal or conrete)
Opening stop
•
Gate inspection
The gate is in good technical condition if it opens and closes without use of force.
The gate moves horizontally during the whole cycle. It opens inward the estate..
•
Inspection of posts
The posts must be at least 70 mm wide. Otherwise, rebuilding may be necessary to ensure proper
corner set-back and fastening.
•
Set stops at the desired opening angle of the gate. The angle should be within the range of 85-95°.
The opening angle of the both leaves should be the same: α=α’. The opening stop is not included in the delivery.
The opening stop is not included in the delivery.
Opening stop is not included in the delivery.
Preparation for assembly
10
EN
- Assembly and service manual for EASY WAY202
EN
Assembly of stops in the
substrate is mandatory.
If stops are mounted at another place than shown in the picture, the actuators and the gate
elements can be damaged.
