Changing Heart Rate Sensor Battery
1.
Lever the battery cover open by using the clip on the strap.
2.
Remove the old battery from the battery cover with a suitable
sized small ridgid stick or bar, such as a toothpick. A
non-metal tool is preferable. Be careful not to damage the
battery cover.
3.
Insert the battery inside the cover with the negative (-) side
outwards. Make sure the sealing ring is in the groove to
ensure water resistance.
4.
Align the ledge on the battery cover with the slot on the
connector and press the battery cover back into place. You
should hear a snap.
Danger of explosion if the battery is replaced with wrong type.
E N G L I S H
20
Customer Service Information
