Polar Electro 520 CTH DB 2020, Instruction Book

Page: 39 / 60

Electrical system
Lights in the back gable
All the external lights are constructed with light diodes
which means that the whole armature must be replaced
in case of disfunction.
1. Switch off the electrical connection inside the caravan.
2. Unscrew the lights and pull out the cable.
3. Replace
4. Do not forget to seal the cable leading-through in the
car body.
Spotlights
Inside the caravan there is a number of spotlights in the
ceiling and bank of lights with spotlights mounted. These
spotlights consist of LEDs, which means that in case of
failure, the entire lighting must be replaced.
Direction
Replacement of rear lights, blinkers, brakes
light, backing lights and fog lights.
End pieces
1. Put a flat screwdriver in the showed direction and turn
carefully to make loose th end peices.
2. Make loose the screws.
3. Pull out the cable so that thr contact jack comes out.
4. Replace the armature.
5. Replace the screws.
Replacement of other external lights.
Replacement of other rear gable lights.
1. Make loose the screws.
2. Pull out the cable so that thr contact jack comes out.
3. Replace the armature.
4. Replace the screws.
Position lights
Sides marking
Width marking
Tent lamp
Width marking L & R Upper brake light
Rear lights
L & R
Fog lights.
Flashers L & R
Reversing
lights L & R
Registration
plate light
Brake lights
L & R
39