Point Grey Flea3 GigE Technical Reference
8 Flea3 GigE Attributes
8.6
Overview of Imaging Parameters
The camera supports control over the following imaging parameters:
Imaging Parameter
GenICam Feature
FlyCapture API Sample Code
Brightness
Analog Control
Setting Brightness Using the FlyCapture API
Shutter Time
Acquisition Control
Setting Shutter Using the FlyCapture API
Gain
Analog Control
Setting Gain Using the FlyCapture API
Auto Exposure
Acquisition Control
Setting Auto Exposure Using the FlyCapture API
Sharpness
Analog Control
Setting Sharpness Using the FlyCapture API
Gamma and Lookup
Table
Analog Control
Setting Gamma Using the FlyCapture API
CSR control:
LUT: 80000h
– 80048h
Image Flip/Mirror
Image Format Control
Embedded Image
Information
CSR control:
FRAME_
INFO: 12F8h
White Balance
(color
models only)
Analog Control
Setting White Balance Using the FlyCapture API
Bayer Color Processing
(color models only)
Image Format Control
Accessing Raw Bayer Data using FlyCapture
Hue
(color models only)
Analog Control
Setting Hue Using the FlyCapture API
Saturation
(color
models only)
Analog Control
Setting Saturation Using the FlyCapture API
Most of these imaging parameters are defined by
modes
and
values
.
There are three modes:
Mode
Description
Off
Feature is in manual mode and values can be set
Continuous
Feature is in automatic mode and values cannot be set
Once
Feature executes once automatically and then returns to manual mode
GenICam Control
The term Continuous is the same as Auto and the term Once is the same as One Push.
Users can define the values for manual operation of a feature.
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.
70
