- 20 -
2000_EN_WARTUNG_2620
MAINTENANCE
EN
• If the distance (A) is greater than 4 mmthen the bushes
(B) on the inside of the tine arms are to changed.
Otherwise subsequent damage may occur to the
machine.
Rotor unit
Curved track
1. Interval:
50 h
2. Performance:
1. Install grease gun on grease nipple (1)
2. Turn the rotary unit to distribute the grease well
3. Install 3-4 strokes during one full turn
4. Perform 3-4 full turns
1
TOP 342
TOP 382
1
TOP 422
TOP 462
gear of rotary unit: Refill grease
1. Interval:
if needed
The gearbox of the rotary unit is greased for lifetime.
Nevertheless, check once a year whether the cogs still
are covered.
2. Implementation:
1. Open oil filling screw (1). The crown wheel toothing
is easily visible when the filling screw is open.
2. Refill fluid grease in the filling plug(1)until the toothing
of the crown wheel is covered completely.
3. If necessary, suck away any excess fluid grease.
4. Close the filling plug (1)
1
3. Fluid grease quantities
Indicative quantities after the complete emptying of the
rotary unit:
TOP 342
~0.80 kg Mobilplex 44
TOP 382
~0.80 kg Mobilplex 44
TOP 422
~1.00 kg Mobilplex 44
TOP 462
~1.00kg Mobilplex 44
In principle, the same procedure as for "Complete Liquid
grease": Fill by eye and aspirate the excess grease.
