- 12 -
2000_EN-EINSATZ_2620
EN
general guidelines on working with the
machine
DANgER
Life-threatening danger exists through rotating rotors
and folding arms
•
Turn the rake off before leaving the cabin.
•
Switch off engine and remove ignition key
prior to any adjustment, maintenance or
repair work.
•
Only carry out work in the rotor area when
the PTO shaft is stationary.
•
Do not enter the rotor area while the drive
motor is running.
•
Before switching on the drive motor, make
sure that the working area is free and that
no one is in the danger zone.
495.173
wARNINg
Risk of serious injury due to thrown material and
stones
•
Ensure that nobody is in the danger area
before starting the rake.
•
Ensure that nobody is near the rake during
operation.
•
Stop work as soon as anybody enters the
danger zone.
wARNINg
Risk of a life-threatening or fatal injury if entering and
standing in the danger area during work.
•
Ensure that there are no people or obsta-
cles in the pivoting area during work. The
machine swivels automatically to the centre
position (M) and is locked in this position.
•
The lock is released automatically when the
machine is lowered again.
TIP
Select a driving speed that ensures the entire crop is
harvested cleanly.
TIP
Regularly check the rotor setting during use in order to
achieve a neat working result.
- In case of overload, turn into a lower gear.
- Switch the bolt on the pivoting headstock (SB) in position
A
B
A
TIP
Only reinsert locking pin with machine raised.
- Lift the three-point trailer machine before narrow curves
and driving backwards.
OpErATiON
