Pocasa L10K3/1 User Manual Download Page 26 | Manualshive

Page: 26 / 45

background image

26

How to connect UPS with RS-485

How to connect -------------------------------------------------- UPS

DATA+ port ------------------------------------------------------- A port (1 pin)

DATA- port -------------------------------------------------------- B port (2 pin)

GND por t --------------------------------------------------------- Communication source (3 pin)

How to connect UPS with UPS RS-485

UPS1 ----------------------------------------------------- UPS2

A port (4 pin) ---------------------------------------------------- A port (1 pin)

B port (5 pin) ---------------------------------------------------- B port (2 pin)

Communication GND (6 pin)-------------------------------- Communication GND (3 pin)

4.9. Communication of SNMP and distant web

Port definition

T568A standard and T568B standard

Ø

T568A standard description order from left to right is: 1-white & green, 2-green, 3-white&orange, 4-blue,

5-white&blue, 6-orange, 7-white&brown, 8-brown

Ø

T568B standard description order from left to right is: 1-white and brown, 2-orange, 3-white&green, 4-blue,

5-white&blue, 6-green, 7-white&brown, 8-brown

SNMP card has the following function

Ø

Provide SNMP MIB to monitor the UPS status.

Ø

Automatically detect and transform the 10/100M fast ETHERNET SPEED

Ø

Set the functions through internet, web browser or NMS

Ø

Support TCP/IP, UDP, SNMP, TELNET, SNTP, PPP, HTTP, SMTP agreements.

Ø

Provide facility installation and updating tools which applied to MS-windows. No need the time-costing

RS232 traditional way to set.

Ø

Send SNMP TRAP, EMAIL and pager to inform the operator when battery errors.

Ø

Can be set of sending daily history record via email.

Ø

Able to match shutdown software to protect computer system to save documents safely and turning off the

machine.

Ø

Net Agent-3 ports generation: able to link out NETFEELER LITE environment detecting system and external

modems. Also able to use the dial-up methods

4.10. Dry connect state communication

Port definition

1 pin: Rectifier signal is the COM port of relay

2 pin: Rectifier signal is the NC port of relay

3 pin: Bypass signal is the COM port of relay

4 pin: Rectifier signal is the NC port of relay

5 pin: Inverter signal is the COM port of relay

6 pin: Inverter signal is the NC port of relay

PDF

文件使用

"pdfFactory Pro"

试用版本创建

www.fineprint.cn

«
...
24
25
26
27
28
...
»

Summary of Contents for L10K3/1














































Reviews:

No comments

Related manuals for L10K3/1

Brand: Gamatronic Pages: 114

SmartOnline SU16KRT

Brand: Tripp Lite Pages: 48

Brand: CyberPower Pages: 2

Brand: V7 Pages: 10

Brand: Xtreme Pages: 48

NeTYS PE 1000 VA

Brand: socomec Pages: 13

Ty-Borealis Series

Brand: Tycor-UPS Pages: 61

B9000FXS 100kVA

Brand: Borri Pages: 54

Brand: Borri Pages: 66

Brand: Gematronic Pages: 14

Brand: Lince Pages: 4

Tacoma HT 1K-3KVA

Brand: Maruson Pages: 44

Brand: Eaton Pages: 22

Brand: Best Power Pages: 60

Brand: Panamax Pages: 4

Brand: Eaton Pages: 50

Brand: Soyntec Pages: 9

Brand: Sven Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands