This symbol appears during transmission (when you press the PTT key) or reception.
When the radio is in rx mode, the led will light up green, while in tx mode it will be red.
Press and release to transmit your unique Call Tone signal to another radio.
The other person will hear a two second call tone. This tone is used only to establish voice
communications.
This letter is displayed when the Dual Watch function is active.
Low power selection
Narrow bandwidth: N = narrow. When the wide (W) bandwidth is activated, no icon is
displayed.
These symbols show that you set a CTCSS code in tx or rx. In tx mode it appears while you
are transmitting, while in rx mode it is shown also in stand-by condition.
These symbols show that you set a DCS code in tx or rx. In tx mode it appears while you
are transmitting, while in rx mode it is shown also in stand-by condition.
This icon indicates where the radio is operating, in which frequency or function. The
arrow is displayed close to the frequency band in use.
WEATHE
Enter weather forecast receiving mode (transmission prohibited in this mode)
