The steps for setting up VOX voice control transmission are as follows:
1> Press
[MENU]
key to enter the main menu, and press the
[+UP]/[-DOWN]
key to enter the MENU 06.
2> Press
[MENU]
key again to enter the
VOX
menu;
3> Press
[+UP]/[-DOWN]
key to select the VOX switch and sensitivity, the selection range is OFF, 1~5;
Note: Level 5 low sensitivity, use under high background noise; Level 1 high sensitivity, use under low background noise.
Select ‘OFF’ will turn off the VOX function. After the VOX function is turned on, the screen will display the ’VOX‘icon.
4> Press
[MENU]
key to confirm;
5> Press
[PTT]
or
[A/B]
key to exit the menu mode.
6.3.7 High/low power selection (PWR) - MENU 07
High power is used for transmission in a long distance or complex environment, and low power is used for transmission in
close range or open terrain. If you need to change the transmit power, the setting steps are as follows:
1> Press
[MENU]
key to enter the main menu, and press
[+UP] /[-DOWN]
key to enter the MENU 07.
2> Press
[MENU]
key again to enter the
PWR
menu;
3> Press
[+UP]/[-DOWN]
key to select the transmit power, and select the range HIGH/LOW;
NOTE: When set to low power transmission, the screen will display the ‘L‘ icon.
4> Press
[MENU]
key to confirm;
5> Press
[PTT]
or
[A/B]
key to exit the menu mode.
6.3.8 Dual Watch function (TDR) - Menu 08
This function is a dual-channel monitor scan, which can monitor the A and B segments in the normal mode. If a signal is
received on the monitoring channel, the scan stays on this channel. The steps for setting the dual-frequency waiting function
are as follows:
1> Press
[MENU]
key to enter the main menu, press
[+UP]/[-DOWN]
key to enter the MENU 08.
2> Press
[MENU]
key again to enter the
TDR
menu;
3> Press
[+UP]/[-DOWN]
key to select the dual-frequency wait switch, and the selection range is ON/OFF;
Note: OFF-turn off the dual watch function; ON-turn on the dual watch function.
Turn on the dual watch function; the screen will display the 'S' icon.
