e.
Enter RX frequency
(Ex. 432000)
f.
[MENU] [2][7] [MENU] [1][0] [MENU]
Enter the desired channel (Ex 10)
-->>[EXIT]
RX has been added
g.
Enter TX frequency (Ex.
437000
)
h.
[MENU] [2][7] [MENU] [1][0] [MENU]
Enter the same channel (Ex 10)
-->>
[EXIT]
TX has been added
i.
In the off state, press and hold the
[MENU]
key to turn on the radio return to MR mode, and the channel number will
reappear.
Ex 2. Programming a Simplex Channel with CTCSS tone
EXAMPLE New memory in Channel 10:
RX =
436000
MHz
TX CTCSS tone 123.0
a.
Change from Menu to Menu by pressing the
[EXIT]
button.
b.
The off state, hold press
[MENU]
key to open the radio, return to the frequency mode.
Channel number at the right will disappear.
c.
[MENU] [2][8]
[MENU] [1] [0] [MENU] [EXIT]
Deletes Prior Data in channel (Ex. 10)
d. [MENU] [1][3] [MENU] 123.0 [MENU] [EXIT]
Select desired TX encode tone (Ex 123 CTCSS)
-->>
Use
[EXIT]
to select Upper display
e.
Enter RX frequency (Ex.
436000
)
f.
[MENU] [2][7] [MENU] [1][0] [MENU]
Enter the desired channel (Ex 10)
-->> [EXIT]
Channel has been added
g.
In the off state, press and hold the
[MENU]
key to turn on the radio return to MR mode, and the channel number will
reappear.
6.11 Repeaters Programming
The following instructions assume that you know what transmit and receive frequencies your repeater employs, and that
you're authorized to use it.
