4.2 LCD Display of the radio
LCD Display
1.
These symbols show that you set a
DCS
or
CTCSS
code in tx or rx. In tx mode it appears while you are transmitting, while in
rx mode it is shown also in stand-by condition.
2.
Received signal strength.
3.
Low power selection
4.
This letter is displayed when the
Dual Watch
function is active.
5.
VOX
function enabled.
6.
Appears when a
positive shift
is activated.
7.
Appears when a
negative shift
is enabled.
8.
Reverse
frequency
9.
Narrow bandwidth:
N = narrow. When the wide (W) bandwidth is activated, no icon is displayed.
10
. This icon indicates the
keypad lock
. To unlock it press
[#
]
.
