Page 18
Section 4
Technical Guide
Default Setting - 4X
4x Pass Through
Switches A1, A2, A3. A5 and B1-8 are up = “ON”
Switches A4 and A6 are down = “OFF”
Option 1 - 4X
4x Write Through
Step 3
- Leave the default switches A1, A2, A5 and B1-8
“ON”
Step 4
- Turn switch A3 “OFF”
QUICKCHIP Dip Switch Settings for 4x
Step 1
-Turn the QUICKCHIP over and orient its position as
shown. (Figure 5.1) If the switch is: Up=ON and
Down=OFF. Switches A1-6 are on the left and B1-8 are
on the right.
Step 2 -
Use the Chip Extractor Tool or any small-tipped object
to change the dip switches according to the settings
shown below.
Figure 5.1 - Bottom View
Option 2 - 4X
4x Pass Through
Step 3
- Turn switches A1, A3, A5 and A6 “ON”
Step 4
- Turn switches A2, A4 and B1-8 “OFF”
Option 3 - 4X
4x Write Through
Step 3
- Turn switches A1, A5 and A6 “ON”
Step 4
- Turn switches A2, A3, A4 and B1-8 “OFF”
