PNI SENSOR CONFIDENTIAL DOCUMENT
DOM DST Evaluation Guide R01
03/2021
Page 3 of 14
2 OVERVIEW
2.1
Evaluation Kit Contents
Figure 1 Evaluation kit contents
Clockwise from top:
1.
Dismounted Soldier Tracking Module (DST Module) – Part number 14573
2.
Wireless Charger bracket design – Part number 14540
3.
Micro USB charging cable
2.2
Quick Start
Note: Detailed steps shown in next sections
1.
Charge DOM DST module using its wireless charger – a full charge will take about an hour.
Make sure to slide the module with the arrow towards the USB connector.
Figure
2
Slide DST Module with the arrow on the module pointed towards the USB Charger
2.
Remove module from charger bracket and set it down on a stable surface such as a table.
•
The DOM DST module has a gyroscope. The gyroscope bias is continuously learned
and setting the module down on a stable surface will allow a quick learning of the
initial gyroscope bias.
•
Keep it stable and still while performing the next steps.
3.
Launch iOS DOM DST App and press the green Start Scan button.
4.
Select the module you’d like to connect to.
