SAFETY
FIRST!
Use a Barrel Plug!
VELOCITY ADJUSTMENT SPRINGS
SEE PAGE 29 FOR DISASSEMBLY OR REASSEMBLY INSTRUCTIONS
The hammer spring assembled with the PMI Piranha
®
paintball marker is intended to provide appropriate
shooting velocity for most
outdoor
paintball game situations and will provide a range of velocities
suitable for most conditions. Shooting velocity
will vary
based upon form of regulated compressed gas
or air used to power the marker, outside temperature, and other factors.
DO NOT EXCEED A VELOCITY OF 300 FEET PER SECOND (fps).
PMI PIRANHA
®
SPECIFICATIONS
spring kit instructions
1. Never allow the marker to shoot at velocities exceeding 300 FPS.
2. Always remove the gas source and all paintballs from your marker before you disassemble any part of it.
3. Before changing any component of a paintball marker, fully understand the entire operator’s manual.
4. When changing springs or anything else that will alter shooting velocity of the marker, have
appropriate chronograph available for testing results.
5. Never shoot marker at the heads of people or animals. Never shoot at anyone not wearing goggles
and head protection approved for paintball games.
6. Spring tension in order from strongest to weakest–red, blue, then white
This operator’s manual is provided with several models of the PMI Piranha
®
paintball marker. Pursuit Marketing,
Inc. (PMI), reserves the right to modify or change its markers without incurring any obligation to incorporate
such modifications or changes in any of its products that were sold prior to the modification. The information
in this operator’s manual may be updated or changed without notice.
This operator’s manual is intended to remain with the paintball marker upon any subsequent transfer of the
marker, whether through sale, resale, or furnishing in any manner. A replacement operator’s manual may be
obtained from Pursuit Marketing, Inc., 55 Howard Ave, Des Plaines, Illinois 60018 USA; phone 1.800.579.1633;
www.buypmi.com.
Action:
Paintballs:
Safety:
Barrel Length:
Barrel:
Height:
Length:
Air Source:
Grip:
Tournament grade semi-automatic powered by
either N2or CO2
9 inches for Piranha
®
SRT, R6, GTI; 11 inches
for EXT and EVO
Threaded and polished aluminum; ported for all models
8 inches (without attached loader)
:
17 inches overall (with 9 in. barrel and
without attachments)
Input Pressure:
Operating Pressure:
Air Source Input:
Mechanical slide or electonic push button/barrel plug
For use only with standard “.68 caliber” (.68-inch
diameter) paintballs. RPS paintballs recommended
Accepts standard connections for CO2, regulated N2, or
regulated compressed air
Recommended 250 psi to 1000 psi
Not to exceed 1000 psi
Bottom line ASA accepts standard
paintball threading
Durable space age polymer with double trigger & guard
12
11
