PMI PIRANHA EFORCE, Operator'S Manual

Page: 22 / 27

Figure 35
Figure 27
FLUSH COCKING BOLT REASSEMBLY
Figure 28 Figure 29
Figure 30
Figure 31
Figure 32
Figure 33 Figure 34
Figure 36–
Electonic Sear Release Pictured
Figure 37
Figure 38
Figure 41
Figure 42
1/8”
Allen
Screw
1/8”
Allen Screw
Bottom
Line ASA
CUP SEAL & VALVE REMOVAL
W WA AR RN NIIN NG G
!
DO NOT ATTEMPT TO COMPLETELY DISASSEMBLE YOUR PIRANHA ® UNLESS QUALIFIED TO DO SO.
CONTACT PMI FOR REPAIR ASSISTANCE AND INFORMATION REGARDING AUTHORIZED PMI
PIRANHA
® REPAIR FACILITIES. PHONE 1.800.579.1633 WEB WWW.BUYPMI.COM
THE PAINTBALL MARKER AIR SYSTEM MUST BE REPAIRED OR REPLACED ONLY WITH THE CORRECT
PRESSURE RATED COMPONENTS.
1. Before disassembling the marker remove the air source, then remove all paintballs from the
marker, barrel, and loader.
2. Unscrew the ASA Slug to access the cup seal assembly. See Figure 39. Remove the valve spring,
cup seal assembly, and guide as in Figure 40.
37
38
Figure 40
Figure 39
3. To remove the bottom line air system, detach the bottom line ASA from the grip by removing the two
screws (#42). See Figure 41. The 5/32” allen wrench for this procedure is not included with the marker.
Then unscrew the vertical grip (#40) or regulator.