background image

Warranty 
For  your  full  5  year  warranty,  register  within  30  days  of 
purchase at www.pmc-speakers.com (click on ‘register a 
product’). This records the purchase of your product and 
provides you, the customer, with an opportunity to make 
suggestions and provide feedback directly to PMC.

Product support & servicing
We are confident your cor integrated amplifier will afford 
you many years of trouble-free high-quality listening. 
But in the unlikely event that it should require repair, we 
can ensure that any replaced parts will exactly match 
the performance of the original — because uniquely, 
during manufacture, we note the precise value of each 
component together with the response of the system as a 
whole.

For advice and service requirements, your primary point 
of contact should be your knowledgeable and authorised 
local PMC dealer or distributor. If you are uncertain who this 
is, please go to the PMC web site at www.pmc-speakers.
com and click on the ‘where to buy’ link at the top of the 
home page. 

NB: Please do not return any products to PMC itself without 
first contacting our service department.

THE PROFESSIONAL MONITOR COMPANY LIMITED
HOLME COURT, BIGGLESWADE, SG18 9ST, UK
T +44 (0) 1767 686300
www.pmc-speakers.com

WARRANTY & SERVICE

Summary of Contents for cor





















Reviews: