Do not use tools to tighten the binding posts.
To avoid potential damage, ensure that the amplifier
is turned off before connecting or disconnecting your
loudspeakers.
It is of vital importance to observe the polarity markings and
maintain positive-to-positive and negative-to-negative
connections. The terminals are colour-coded to aid in their
identification: positive terminals are red, negative terminals
are black.
Inputs
The rear panel of the cor integrated features four single-
ended unbalanced RCA inputs, plus a balanced XLR input.
There is also a direct input which directly feeds the power
amp, bypassing the preamp.
NB: The preamp is still fully functional in direct mode.
Outputs
The loudspeaker outputs are provided on two pairs of
4mm binding posts. If you wish to use the cor integrated
as a pre amplifier, there is a preamp output on twin RCA
connectors.
The binding posts can accommodate bare wire, but we
recommend the use of either spade lugs or 4mm ‘banana’
plugs in order to maintain an electrical connection of the
highest integrity and avoid the possibility of short circuits.
MAKING CONNECTIONS
