Front-panel power switch (touch sensitive)
Illuminates red for initial power-up. Once touched,
logo turns white and amp enters start up mode in
mute. When amp is ready, mute will disable.
Input selectors
Audio source selection buttons,
lit when selected.
Direct
Press when direct input is
required to the power amp,
bypassing the pre amp. Lit
when selected.
Balance fader
Allows for adjustment of left/
right balance. White LED is lit
when fader is centred, red LED
indicates fader is offset. This still
functions when in mono mode.
Volume
The volume control is fully
motorised and can be
controlled via the remote
Tone controls/faders
For micro adjustment of the tonal
balance of high & how frequency,
with a range of +/-10dB. When fader
is centred, a white LED is lit. When
boosting or cutting, a red LED is lit.
Fader will pause in centre when
panning via remote.
IR receiver
This is the window for the
infra-red signals from direct
sight of the remote control
Headphone output
This is auto-sensing and mutes the main
output when headphones are inserted
fully. When headphones removed
amplifier will go into mute mode, and
must be manually unmuted.
Mono
When selected this sums
both left and right to a
single mono signal.
Tone bypass
This disables the tone
controls regardless of
the faders’ position
and fader LEDs.
Mute
When selected it silences all
output with the exception of
the direct input to the power
amplifier & the headphone
output.
