PM Procom DES-P, Operating Instructions Manual

Page: 8 / 9

DES-P Digital Engine Supervisor
Cat_DES-P-09-GSM new Ver 2.0
Page 8/9
10.3 Fault Reset
All internal faults can be reset by pressing (R) switch after the generator is stopped. In case the
engine fails to stop “STOP KEY” can be pressed for manual attempt to stop engine.
11.0 Terminal description
Terminal Number Description
1 Not Connected
2 Not Connected
3 Not Connected
4 Not Connected
5 LLOP Sensor
6 HWT Sensor
7 Fuel Sensor
8 RWL
9 Charging Alternator Input
10 Auxiliary ve
11 Auxiliary supply -ve
12 Crank NO Contact
13 Solenoid NO Contact
14 Charging Alternator On
15 Hooter
16
Common for All Contacts
17 Remote Start
18 Remote Stop
19 Not Connected
20 Not Connected
21 Not Connected
22 Not Connected
23 Not Connected
24 Not Connected
12.0 Model Selection
The nomenclature for selecting the model is as follows:
DES-P
13.0 Specifications
ƒ
Surge 1.2/50Usec 2.5KV
ƒ
Battery Voltage Suitable for 12V/24 VDC System
ƒ
Min. voltage to power on 9V
ƒ
Min Running Voltage after Power on 4V
ƒ
Max. Battery Voltage 35V
ƒ
DC Interruption time 1 Sec.
ƒ
Digital Output + 12V
ƒ
Cut out Dimensions 92mm X 92mm
ƒ
Depth 120mm
ƒ
Digital Input Level Battery –Ve except Charging Alt, which is
b Ve