0507430010/UltraFlex 4-LC/00/01
EN - 2
PREFACE
Using this manual
This manual is intended to be used as a work of
reference for professional, well trained and authorised
users to be able to safely install, use, maintain and
repair the product mentioned on the cover of this
document.
Pictograms and symbols
The following pictograms and symbols are used in
this
manual
:
!
Suggestions and recommendations to simplify
carrying out tasks and actions.
CAUTION!
Procedures which, if not carried out with the
necessary caution, caution, could damage the
product, the workshop or the environment.
WARNING
Procedures which, if not carried out with the
necessary caution, may damage the product
or cause serious personal injury.
j
j
j
j
WARNING
Fire hazard! Never use the product for
extracting inflammable, glowing or burning
particles or solids or liquids. Never use the
product for extracting aggressive fumes (such
as hydrochloric acid).
Related documentation
The following related documents are available:
-
0507434010/NMB-TNB
-
0507230010/WL-AST
-
0507360010/NCW 4-11
Manual number
The manual number consists of four fields:
-
field 1: article number manual
-
field 2: product name
-
field 3: version
-
field 4: year of issue
Service and technical support
For information about technical adjustments,
maintenance or repair jobs which are not dealt with in
this manual, please contact the supplier of the
product. He will always be willing to help you. Make
sure you have the following specifications at hand:
•
product name
•
serial number
These data can be found on the identification plate.
IDENTIFICATION OF THE PRODUCT
The identification plate (fig. 1) contains the following
data:
A
serial number
B
product name
Fig. 1
SAFETY INSTRUCTIONS AND
WARNINGS
General
The manufacturer does not accept any liability for
damage to the product or personal injury caused by
non-observance of the safety instructions in this
manual, or by negligence during installation, use,
maintenance and repair of the product mentioned on
the cover of this document and any corresponding
accessories.
Specific working conditions or used accessories may
require additional safety instructions. Immediately
contact your supplier if you detect a potential danger
when using the product.
The user of the product is always fully
responsible for observing the local safety
instructions and regulations.
Observe all safety instructions and regulations
which apply to handling welding equipment.
User manual
•
Everyone working on or with the product, must be
familiar with the contents of this manual and must
strictly observe the instructions therein. The
management should instruct the personnel in
accordance with the manual and observe all
instructions and directions given.
•
Never change the order of the steps to perform.
•
Always keep the manual with the product.
Pictograms and instructions on the product (if
present)
•
The pictograms, warnings and instructions
attached to the product are part of the safety
features. They must not be covered or removed
and must be present and legible during the entire
life of the product.
•
Immediately replace or repair damaged or illegible
pictograms, warnings and instructions.
!!!!
A
B
euromate
air cleaning systems
ALKMAAR-HOLLAND
TYPE
SER.NR.
!!!!
