160420/0 STRA MG manual
EN - 3
PREFACE
Using this manual
Pictograms and symbols
The following pictograms and symbols are used in this manual:
TIP
Suggestions and recommendations to simplify
carrying out tasks and actions
ATTENTION
A remark with additional information for the user. A
remark brings possible problems to the user’s
attention.
CAUTION!
Procedures, if not carried out with the necessary
caution, could damage the product, the workshop or
the environment.
CAUTION
Denotes risk of electric shock.
WARNING!
Fire hazard! Important warning to prevent fire.
WARNING!
Explosion hazard! Important warning to prevent
explosions.
Personal protective equipment (PPE)
Instruction to use respiratory protection when you do
service, maintenance and repair jobs, as well as
during functional testing. We recommend to use a
half-face respirator according to DIN EN 141/143,
protection class P3.
Personal protective equipment (PPE)
Instruction to use protective gloves when you do
service, maintenance and repair jobs.
Text indicators
Listings indicated by “-” (hyphen) concern enumerations.
Listings indicated by “•” (bullet point) describe steps to perform.
Service and technical support
For information about specific adjustments, maintenance or
repair jobs which are not dealt with in this manual, please
contact the supplier of the product. He will always be willing to
help you. Make sure you have the following specifications at
hand:
- product name
- serial number
You can find these data on the identification plate.
Product indications
Unless specifically stated, the contents of this manual applies
to the STRA.
1
INTRODUCTION
1.1
Identification of the product
The identification plate contains, among other things, the
following data:
- product name
- serial number
- supply voltage and frequency
- power consumption
1.2
General description
The straight rail system is designed to be connected to a
vehicle’s tailpipe to capture and remove the exhaust emissions.
The STRA is fully automatic, from the fan activation to the
automatic nozzle release from the exiting vehicle. It is easy in
use with only a one-step connection to the system as the vehicle
enters the facility.
The STRA is ideal for drive-through bays in which up to four
vehicles are parked in tandem.
1.3
Technical specifications
Physical dimensions and properties
Material
• rail
• rubber seal
• aluminum
• rubber coated with UHMW
(with low friction layer)
Length
30 - 100 ft. (9 - 30 meters)
Color
silver/black
Ambient conditions
Operating temperature:
all ambient conditions allowed
Max. relative humidity
80%
Outdoor use allowed
no
Scope of supply
STRA pneumatic
Aluminium profile | RRS | RRRS-X | CA-15 | W-15 | STR-MZ |
RRBC | RRIBC | RRDC-200 | RRTS II | SBKM | SBT-SL
*
*
Crab and hose package to be ordered separately
STRM magnetic
Aluminium profile | RRS | RRRS-X | CA-15 | W-15 | STR-MZ |
RRBC | RRIBC | RRDC-200 | RRTS II | SBKM | SBT-SL
*
*
Crab and hose package to be ordered separately
Options and accessories
STRA MG
IC | Hose package
STRA PN
ICCA | Hose package
2
PRODUCT DESCRIPTION
2.1
Product components
The product consists of the following main components and
elements:
Support leg
The aluminium support leg is used for both
vertical and horizontal mounting. The standard
length is 19 ft (5,7 m) and has to be cut to
proper lengths. The dimension is 2 x 2 x
0.1 in. (50 x 50 x 2.5 mm).
