160420/0 STRA MG manual
EN - 12
The Magnetic Grabber nozzle must be placed straight onto the
conical tailpipe adapter, but to connect it is easiest to first attach
the top of the Magnetic Grabber and then press down on the
safety disconnect in order to attach the lower part of the
Magnetic Grabber.
The conical design of the connection surface ensures safe and
easy positioning.
6
MAINTENANCE
6.1
Periodic maintenance
The product has been designed to function without problems
for a long time. In order to guarantee this some simple, regular
maintenance activities are required which are described in this
chapter.
The maintenance activities in the table below can be carried
out by the user.
Component
Action
Frequency:
every X months
X=6
X=12
Hose
Check the hose for
any defects
X
*
Nozzle
Check if the nozzle
is still tightly fixed
to the hose
X
*
Clean the
connection parts of
the nozzle
X
Rail
Clean the inside of
the rail
X
Trolley
Check if the trolley
runs smoothly
through the rail
and stops correctly
at the end stop
X
Clean the trolley
X
Rubber seal
Clean the inside of
the rubber seal
X
Balancer
Check the balancer
locking cable and
support wire.
Adjust tension
when needed.
X
*
Before every use.
ATTENTION
Do not use solvents to clean the system.
