160420/0 STRA MG manual
EN - 13
7
TROUBLESHOOTING
Problem
Possible cause
Solution
The nozzle does
not connect tightly
to the tailpipe
(adapter).
The magnets in the
Grabber cannot
make a clear
connection.
Clean the tailpipe
adapter from any
soot or dirt.
The swing-back of
the hose drop after
disconnection is too
extreme.
The balancer
pre-tension is too
strong.
Decrease the
balancer
pre-tension.
The BLC is too
long.
Shorten the BLC.
The distance
between the
vehicle and the
standard hose
position is not
correct.
Make sure the
vehicle and rail are
positioned
correctly.
The end stop is
located too far
from the door.
Reposition the rail
closer to the entry
door.
The swingback of
the hose drop after
disconnection is too
extreme.
The balancer
pre-tension is too
strong.
Decrease the
balancer
pre-tension
The end stop is
located too far
from or too close to
the door.
Reposition the end
stop.
The distance
between the
vehicle and the
standard hose
position is
incorrect.
Rightly position rail
and vehicle.
8
DISPOSAL
After life of the product, dispose it of in accordance with
federal, state or local regulations.
9
SPARE PARTS
10
Pos. Art. no.
Description
Note
1
0000113752 Internal crab
2
-
Hose
For article
numbers and
prices please
refer to the price
list.
3
-
Balancer
For balancer
spare parts
please refer to
the balancer
manual.
1
2
3
4
5
6
7
