Pluto CIRCLE 0, Instruction Manual

Page: 5 / 14

Setting Up Your Circle O(Zero)
Check 1
Please open the cover of the product to make
sure that the motor cover (top) is fully insta-
lled. Sand entering the motor cover (top) may
cause failure. Check that there are no gaps in the litter box and product entrance before using it.
If there is a gap, refit the litter box and make sure that the motor cover(top) is installed
before operating.
Pour in the cat litter
Pour in proper type of litter(bentonite/tofu)
that fits the type of the scoop. Add the amount of sand based on the fill line
inside the litter box. If you put too much, the
scoop may not be able to rotate properly.
Plug-in the power adapter to the product.
Power
Connect the cord to the outlet and complete the setup.
Please check that the shipment is fully assembled and may not be assembled during shipment.
Motor cover(Top)
(Refer to the tenth on page 10)