1. Plug the AC adapter into the scanner’s power receptor.
2. Plug the other end of the AC adapter into a standard AC power outlet.
3. Plug the square end of the included USB cable to the PC1 USB port
at the
rear of the scanner.
4. Plug the rectangular end of the USB cable to an available USB port on the
computer 1.
5. Plug the square end of the included USB cable to the PC2 USB port
at the
rear of the scanner.
6. Plug the rectangular end of the USB cable to an available
USB port on the
computer 2.
7. If you plan to connect your scanner to a USB hub
, make sure that the hub is
connected to the USB port in your computer. Next, connect the scanner to the USB
hub.
S
S
t
t
e
e
p
p
2
2
.
.
I
I
n
n
s
s
t
t
a
a
l
l
l
l
i
i
n
n
g
g
t
t
h
h
e
e
S
S
o
o
f
f
t
t
w
w
a
a
r
r
e
e
1. Switch on the scanner power from the rear of the scanner.
Attention
Please press PC1 button on the scanner to
activate the scanner connection before
installing the software for computer 1.
Please press PC2 button on the scanner to
activate the scanner connection before
installing the software for computer 2.
2. If the USB components on your computer are functioning correctly, they will
automatically detect the scanner causing the
Add New Hardware Wizard
or
Found New Hardware Wizard
to be launched.
Information
If your computer is off when the scanner is
connected, the “Add New Hardware Wizard”
message will not be displayed until the computer
is on and Windows starts.
3. For Windows 2000:
a. Click the
Next
button when the “Add New Hardware Wizard” window is
displayed.
b. Select
Search for the Best Driver for Your Device [Recommended]
and
click the
Next
button.
c. The next window will ask you where to search to find the drive. Select
CD-
ROM drive
, and deselect
Floppy disk drives
if it is checked.
d. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive and then click the
Next
button.
3
The USB hub is not included with the scanner.
9
