5. Place the pad frame on top of the pad and tighten the screw securely.
6. Close the ADF cover by pushing it back down until it snaps back into place.
Make sure the ADF cover is completely shut without protrusion on both sides.
A
LIGNING THE
S
CANNER
In most cases, the scanner doesn’t need to be aligned but there are instances
when the alignment might be required. You need to align the scanner only if parts of
the scanned document are missing from any of its edges. For example, the heading of
a document might be missing from the top edge after the document has been scanned.
Alignment for Flatbed Scan:
1. Place a document face down on the upper left corner of the scanner glass.
2. Right click the icon
on the Windows system tray and select
Scanner
Utility
from the menu that pops up.
3. The Scanner Utility window opens. Find the
Initial Scanning Position
Alignment
section and select
Flatbed Reflective
as the source.
Alignment
Source
Alignment
Position
Alignment
Window
31