Plush TUSH Series, Technical Documentation Manual

Page: 19 / 25

Technical Documentation - TUSH001 19
aPPenDix B
Step 1:
Place the child car Booster Seat on the passenger seat ensuring it is firmly against the
vehicle seat and is facing the direction of travel.
Step2:
Sit your child on the Booster Seat with the child’s back against the backrest.
Step 3:
With your child sitting upright, extract the adult seat belt and pass it across the front
of your child, pass the lap section of the safety belt over the child’s lap and under both arm
rests of the Booster Seat using red tab guides seen in DIAGRAM 1. Ensure the lap belt is low
down on the child’s lap and firmly engaging the pelvis.
Ensure on the buckle side both the lap and diagonal sections of the adult seatbelt pass under
the arm rest.
(See DiagRam 3B on page 16)
Connect the adult belt connector tongue to the seat belt buckle.
(See DiagRam 2 on page 15)
Step 4:
Shoulder belt positioning clip - Slide the vehicle shoulder belt onto the clip as shown
above in label 2 and pull strap down to tighten clip against child’s shoulder.
(See DiagRam 3a on page 15)
Step 5:
To release your child from the Booster Seat, simply release the belt buckle and
carefully remove your child from the Booster Seat. When the Booster Seat is not in use
always secure it by placing the seat belt around it.
make sure there are no twists on the seat belt.