8
CHECK LIST OF SIMPLE FAILURES
HANDLING PRECAUTIONS
7. When replacing recording paper, do not place any objects on the open printer
cover or do not put your elbows on it.
8. After use, make sure to turn OFF the power switch. In addition, when it is not to be
used for a long time, make certain that the plug of the power cord is pulled out form
the outlet.
9. Always use the correct type of marker. Be careful not to use other markers as the
sheet may be damaged or, in some cases, the ink may be difficult to remove.
10. Write within an area of a size that can be easily read.
<BEFORE ASKING FOR A REPAIR SERVICE>
CONDITIONS
CHECKPOINTS
If no satisfactory result can be achieved even after the above, contact the suppliers or our
company.
11. When moving this machine, turn OFF the caster lock switches, hold both the right
and the left sides of the main unit firmly, and avoid any sudden jolts or shocks.
When the power fails
When pressing copy key does not result
in copying
Although printer is functioning, nothing is
copied on recording paper
When characters written on board screen
cannot be rubbed out even by the use of
an eraser
When copy is dirty
Check if power cord is pulled out outlet.
Check if paper warning lamp (red) is lit.
Check if winding direction of recording
paper is set on reverse. (No copying is
made on back of recording paper)
Check if any marker except the correct type
has been used. Wipe off with a damp cloth
or neutral detergent.
Check for ink residue on the screen. If it is
stained, wipe off carefully with a soft damp
cloth.
30mm
30mm
20mm
20mm
