6
When a red line appears at the edges of the recording paper. The red line will
appear when there is only about one meter (3 feet) or so of recording paper left on
the roll.
When the paper out lamp lights red.
HOW TO USE
Note:
Please use only the correct type of recording paper.
Particular attention must be given to the winding direction of the recording paper, since
copying cannot be performed if the winding direction of the recording paper is reversed.
Be sure to keep the recording paper straight when loading, failure to do so may cause
wrinkling or tearing of the paper during the copy function.
Push both ends of the hatch closed
until it locks with a clicking noise. At
this time, make sure that the recording
paper has not slipped.
Replace the recording paper in the following situations
Cut off the extra recording paper
from the printer outlet.
*Automatic Power Cut-off Function
If there is no key operation for about an hour, the fluorescent lamp inside the main unit
automatically goes off and the machine enters a state of power conservation. (At this time, the
power lamp is lit.)
If at any time any key is pressed, the fluorescent lamp light again, and the normal operating
condition is restored.
