PLUS Vision U7-132, User Manual

Page: 29 / 67

E-29
General Operation
Enlargement of the Image and Video Movement
This function digitally enlarges the personal computer image and video
image.
(1) Press the ZOOM button to enlarge the image.
The zoom display appears when the ZOOM button is pressed.
When the
왖
button is pressed, the image is enlarged approximately 2
times, and when the
왔
button is pressed the image is reduced (re-
turning to 1:1).
• Images input from a Digital, Image Viewer or Network cannot be
enlarged.
(No enlargement) (Approximately 2 times enlargement)
The image can also be moved in the following circumstances.
• When “Aspect” is set to “Real” by the signal of the Analog RGB or DVI analog, and the input resolution
is higher than the display resolution of the projector.
• When “Aspect” is set to “Zoom” by the video signal.
Note:
* Zoom and image movement functions are cancelled when the input is switched.
* Movement of the screen will not be possible when the menu screen is being displayed.
Zoom
0
Zoom 21
(3) Press the CANCEL button to immediately close the display.
The display will close when there has not been an operation in about
10 seconds.
(2) Pressing the SELECT (
왖왔왗왘
) buttons on the remote control at
the time of the zoom operation will cause the display position to
move.
(There will not be any movement when zoom is at 0.)
(Approximately 2 times enlargement) (Movement)
Zoom
21
Zoom
21
Note:
After magnifying the image, be sure to use the ZOOM button to bring the gauge
value back to “0”.
(3)
(1)
(2)
FREEZE MUTE
LASER
AUTO
TIMER
VOL
RGB
VIDEO
R-CLICK/
CANCEL
QUICK MENU
ENTER
STANDBY
Q
1
3
ZOOM
2
4