P6
Installing Guard
[Model BCH25]
1. Fasten the string cutoff blade to the guard with
M5
×
15 screws as shown on Fig.1.
2. Atttach the guard to the shaft with the two M5x30
screws and plate as shown.
[Model BCH25H, BCH35, BCH35H]
Blade Guard
Attach the blade guard to the gearcase with the two M6
×
30
screws as shown on
Fig.2.
Trimmer Head Guard
(Install the string cutoff blade and guard extension to the blade guard.)
1. Insert the square nut into guard extension as shown on Fig. 3.
2. Attach the String Cutoff Blade to guard extension using
M5
×
20 Screw, locking with square nut (on Fig.3) as shown on Fig. 4.
3. Enter the guide in the slot of Blade Guard on Fig. 5.
Make sure place the three hooks into the position on the guard
as shown on Fig. 6.
Fig.4
String Cutoff
Blade
M5
×
20
Screw
WARNING
POTENTIAL HAZARD
・
Foreign objects can be thrown by Trimmer/Brushcutter.
WHAT CAN HAPPEN
・
Contact with thrown objects can cause personal injury.
HOW TO AVOID THE HAZARD
・
Never operate the Trimmer/Brushcutter without the
guard in place.
Square Nut
Guard
Extension
Fig.3
Fig.6
Hook
Hook
Blade Guard
Guard extension
Fig.5
Guide
M 5 X 3 0 S c re w ( 2 )
G e a r C as e
S h a f t
G u a r d
M 5 X 1 5
S c r e w ( 2 )
P l at e
H e x N u t
Fig.1
String Cutoff Blade
M6
×
30 Screw(2)
Gearcase
Guard
Fig.2
231147-00 GB 0908