manualshive.com logo in svg

PLP BCH25, Operator'S Manual, Page: 16 / 20

Share
Download
PLP BCH25 Operator'S Manual Download Page 16

 
 
 
 
 

・

If the Brushcutter blade becomes jammed, stop the engine immediately. 

・

Make certain all moving parts have stopped and disconnect the spark plug before inspecting the 

equipment for damage. 

・

Never use a Brushcutter that has chipped, cracked or broken cutting attachment or guard. 

 
IMPORTANT: To detach the shoulder harness/ Strap quickly from the Brushcutter, pull 
upward on the Tab.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Cutting Direction

 

 
 
 
 
 
 
 
 
 
 
 
 

When cutting heavy brush or small trees, always swing the 
Brushcutter from right to left. Swinging the Brushcutter from left 
to right can cause the blade to kick back. 

─

13

─

CAUTION

 

 
 

・

Always wear gloves and protective clothing when operating the Brushcutter. 

 

WARNING

 
 

POTENTIAL HAZARD 

 

・

Cutting heavy brush or small trees from the wrong   

      direction can cause the Brushcutter blade to kick back. 

 
 

WHAT CAN HAPPEN

 

 

・

Contact with the Brushcutter blade can cause severe   

   personal injury. 

 
 

HOW TO AVOID THE HAZARD

 

 

・

Always swing the Brushcutter from right to left when   

      cutting heavy brush or small trees as shown.

 

CORRECT

Direction of 
Swing

 

No Kick-back 
Zone

INCORRECT

 

Direction of 
Swing

DANGER

Kick-back Zone

Harness

Tab

 

Strap 

Tab

[BCH25, BCH25H, BCH35]

 

[BCH35H]

 

Summary of Contents for BCH25





















Reviews:

No comments