AC Power Connection Safety
l
Always connect the power cord to the CrewCom Control Unit before connecting to the outlet.
l
CrewCom Control Units are powered by an internal power supply. The cord to connect the internal power
supply to the mains supply must conform to the following specifications:
o
The mains power cord shall have an IEC C13 connector at one end and a mains power plug at the
opposite end.
o
An IEC C13 plug has three pins. The center pin carries the earth/ground. The remaining two pins carry
neutral and live circuits.
o
The conductors of the mains cords shall have adequate cross-sectional area for rated current
consumption of the equipment.
o
The mains plug that connects to the mains supply must be approved for use in the country in which the
equipment will be used.
o
The mains power cord must be an IEC mains 3-Wire grounding power cord complying with standard
IEC60320; IEC320/C13.
o
Mains power cords used in the U.S. must also comply with standard UL817.
Safety Information - 4
Summary of Contents for Crewcom CCU-22
Page 1: ...Control Unit OPERATING MANUAL...
Page 2: ...ii...
