Section 1: LAN Settings
This section contains all LAN settings to configure your Plextor StorX to the network.
Depending on how the network is set up, changes to this page may or may not be
necessary. You can choose between DHCP and Static IP from the “Protocol”
DHCP
Selecting this option enables the Plextor StorX to request an IP and auto-configure
itself to the network when there is a DHCP Server present.
NOTE: If DHCP Client is enabled, but there is no DHCP server, the Plextor StorX
would fall back to the default IP address of 192.168.16.1.
Static IP
Select this option when there is no DHCP Server present on the network and
manually enter the network settings in the fields provided below this option.
IP Address
– Enter the static IP address
Subnet
Mask
–
Enter the Subnet Mask address
Default Gateway
– Enter the Gateway IP address
DNS1 and DNS2 (both optional)
– Enter the DNS IP addresses
13 of 46
NOTE: Contact the network provider/ administrator for additional
assistance in manually entering the above information.
