Plextor PX-800A, Installation And User Manual

Page: 57 / 94

Section 4. Maintenance and Troubleshooting
PX-800A Installation and Users Manual
49
9. Position the new bezel in front of the drive and slide it gently in
place. Ensure that the top clip and all three bezel hooks lock into
place.
Figure 27: Slide the new bezel into position and make sure all three
bezel hooks snap into place
10. Install the new tray face plate by pressing the L-shaped forms on
both sides of the face plate into the rib of the disc tray, and sliding
the face plate downward until the two hooks are fixed.
Figure 28: Install the tray face plate,
close the disc tray gently, and reinstall the drive in the computer
To install the drive in your computer, go to “Mount the PX-800A Drive”
on page 12.