Plextor ConvertX PX-AV100U, Installation And User Manual

Page: 20 / 80

Section 2. Installing Your ConvertX
14
Plextor ConvertX PX-AV100U Installation and Users Manual
5. After connecting the USB cable, you see a message in the Windows
system tray indicating that Windows has Found New Hardware.
Then you see the Found New Hardware Wizard that installs the
software for ConvertX AV100U A/V Capture.
6.
Make sure Install the software automatically is selected and click
Next. (You may see a window that states the software has not passed
Windows Logo testing. This is OK. If you see this window, click
Continue Anyway.)
7.
After a few moments you see a message indicating the wizard has
finished installing software for the Plextor ConvertX A/V Capture.
8.
Click Finish. You see another Found New Hardware Wizard, this
one to install software for the ConvertX A/V Capture Audio.
9.
Make sure Install the software automatically is selected and click
Next. (You may see a window that states the software has not passed
Windows Logo testing. This is OK. If you see this window, click
Continue Anyway.)
10.
After a few moments you see a message indicating the wizard has
finished installing software for the Plextor ConvertX A/V Capture
Audio.
11.
Click Finish. You see a popup box at the bottom of the screen that
says your new hardware is installed and ready to use. Your
ConvertX is automatically recognized by the computer. (If you are
asked to reboot, remove the Plextor disc from the drive and restart
your computer.)