7077-801F • 08/20
16
NOTE:
GHP recommends using a heavy duty vacuum
cleaner specifically designed for solid fuel appliance
cleaning.
10. Cleaning Exhaust Blower - Requires No Lubrication
• Frequency:
Yearly or more frequently depending on
ash build-up
• By:
Homeowner or Qualified Service Technician
a. Be sure the appliance is allowed to cool, has been
unplugged and the exhaust blower is off.
b. Remove the left side panel.
c. Remove the six screws holding the exhaust blower
motor to the housing and remove the motor. Using
caution as to not damage the gasket when removing
the blower. If damage occurs, install a new gasket
available as a replacement part.
d. Vacuum the blower’s impellers. Use care not to
bend or damage the blower fins.
e. Using a brush or vacuum attachment, clean the
inside of the exhaust outlet.
f. Reattach the motor. Make sure the wires are
attached to the terminals on the blower.
9. Cleaning Convection Blower - Requires No
Lubrication
• Frequency:
Monthly depending on Dust/Dirt build-up
• By:
Homeowner or Qualified Service Technician
a. Be sure the appliance is allowed to cool and has been
unplugged.
b. Remove the right side panel.
c. Sweep or vacuum out any build-up on the impellers.
Use a brush or compressed air to loosen dirt if needed.
─ Avoid damaging the impellers.
8. Door Handle Inspection
• Frequency:
Monthly or prior to heating season
• By:
Homeowner
The gasket between the glass and firebox should be
inspected periodically to make sure there is a good seal.
7.
Cleaning the Exhaust Path, Baffles & Drop Tube
• Frequency:
Monthly or every 25 bags or more frequently
depending on ash build-up.
• By:
Homeowner
a. Appliance must be completely cool.
b. Open the door and remove the center baffle first and
then the right and left baffles. Thoroughly vacuum the
exhaust path and drop tube and continue throughout
the rest of the firebox. Also vacuum the front and back
of the baffles.
c. Using a small brush, clean the inner walls of the
exhaust outlet from the access hole inside the firebox.
The access hole will be visible following the removal
of the left side baffle. After loosening up debris on the
inner walls of the outlet, vacuum out.
─ This is important as the exhaust temperature
probe is attached to the right side of the outlet.
If this is not maintained on a regular basis, the
appliance will experience nuisance shut downs
and/or missed ignitions.
d. Replace the right and left baffles and then the center
baffle and close and latch the door.
1
2
3
