YMER 3
OPERATORS GUIDE
March 2020
www.plcelectronicsolutions.com
D E S I G N E D A N D M A D E I N S W E D E N S I N C E 1 9 6 4
®
D E S I G N E D A N D M A D E I N S W E D E N S I N C E 1 9 6 4
®
11
- Delete Lens
Deletes the lens in the selected lens storage position, to change lens position, see Select Lens section
- Open Main Menu, select “Map Len”
- Select “DelLens, the lens to be deleted is whowed, select “Yes Del”
- “Exit”
- Delete all lens
Not activated at the moment
Trouble Shooting
Q�
My motor will not calibrate the full span of the lens
A1�
Make sure the lens is not right at the lens end stop
A2�
Try using LenSaverTM manual calibration
A3�
Try switching to a new gear. Play between gear and hub can cause problems with automatic calibration.
Motor service might be required.
Q�
Automatic calibration will not start
A�
Make sure the system is set to automatic and not manual calibration. Switching between automatic and
LenSaverTM manual calibration can only be done on the receiver.
Q�
My macro markers are not exactly where I placed them
A�
Try waiting about one second after each press of the button for the system to calculate the new parameters
and correctly place the marker.
Q�
I am experiencing connectivity or signal quality issues
A1�
Make sure the antenna is not damaged.
A2�
Try staying within line of sight. Solid structures can interfere with the signal.
A3�
Try keeping the antenna on the receiver and transmitter upright
Q�
My motor spins uncontrollably at power up/calibration
A�
This is a sign of encoder malfunction. Make sure all cables are connected to the correct connector. Make sure
the motor connector and pins are not damaged. Make sure the system is not powered up when switching or
connecting cables or equipment. Service and/or repairs might be required.
Q�
My transmitter/receiver won’t pair
A1�
Avoid waiting too long between starting the pairing sequence on the transmitter and receiver. Try starting
the pairing on both units within a few seconds.
A2�
Try keeping the transmitter and receiver at a minimum distance of 50 cm from each other during pairing.
