YMER 3
OPERATORS GUIDE
March 2020
www.plcelectronicsolutions.com
D E S I G N E D A N D M A D E I N S W E D E N S I N C E 1 9 6 4
®
D E S I G N E D A N D M A D E I N S W E D E N S I N C E 1 9 6 4
®
3
Hedén Ymer 3 radio module is fully compliant with European CE, United States FCC and GITEKI Japanese stan
-
•
Avoid using Ymer system near water or in rainy conditions. Water intrusion may lead to
permanent damage.
•
The Ymer transmitter control knob is sensitive to impacts. Impacts may cause damage
to the internal potentiometer.
•
All electronics is sensitive to over voltage and ESD, only connect and disconnect the
motor when the receiver is not powered up.
•
Make sure all cables are original Hedén cables and inspect for damage before use.
Using faulty cables may cause serious damage to internal electronics.
•
We recommend using genuine Sony NP-FM500H batteries in the handset for longest
run time.
•
The included foam insert will fit straight into a Pelican/Peli 1450 case.
Important information
YMER 3 Kit Components
Yme r Transmitter Unit....................................................1x
Ymer Receiver Unit.......................................................1x
HÉDEN motor (Extra motors is optional)........................1x
Rod mount 19mm w. 15 mm insert...............................1x
0.8 pitch gear (complete gear set is optional)..............1x
Motor cable..................................................................1x
Receiver power cable....................................................1x
HÉDEN neck strap.........................................................1x
Scale ring......................................................................1x
Receiver Bracket w. 1/4 inch screw..............................1x
