PLAYSTAR LEGACY PS 73161 Safety Manual & Building Instructions Download Page 44 | Manualshive

Page: 44 / 44

background image

Printed in U.S.A.

LT 6514 R2

Please call us Toll Free at 1-888-PlAYSTAR

(752-9782)

Monday through Friday, 8:00

A.M.

to 5:00

P. M.

C.S.T.

Do not return to the store.

Thank You for choosing PlayStar. Because it is our intention

to make this a positive family experience, we have taken great
care in preparing this product. Should you have any questions,
or if we can assist you in any way, please call our friendly
Customer Service Department for immediate action.

Ask for Customer Service.

We Will Gladly Help!

© 2014, PlayStar, Inc. Reproduction of this document in part or whole is prohibited without the permission of PlayStar, Inc.

PlayStar, Incorporated, Janesville, WI 53547

Protected  by  one  or  more  of  the  following  United  States  or  Foreign  Patents:    US D418,189;  US D409,708;  US D424,154;  US D428,637;  US 6,402,663;  US D422,332;  US  D410,059;
US 6,068,557;  US 6,302,801;  US 6,482,095;  US 6,039,654;  US D410,060;  US D424,649;  US 6,361,445;  CA 2,304,345;  US 6,540,645;  US 6,709,365;  US 6,942,600;  US D513,779;
US 6,991,550;  CA D109,228;  CA D109,224;  CA D109,225;  CA 2,304,113;  US  6,629,907;  US D517,636;  US D518,530;  US  D520,590;  US  520,591;  US  D534,613;  US  7,186,183;
US  7,189,034;  US  7,253,951;  US  D548,760;  US  7,304,810;  CA  D109,227;  CA  D109,226;  CA  D112,355;  CA  D113,437;  CA  D113,442;  CA  D114,067;  CA  D114,068;  CA  2,304,896;
CA  D119,674;  US  D573,222;  US  7,419,437;  CA  2,304,068;  CA  2,488,576;  US  D580,507;  US  D585,570;  CA  2,490,923;  CA  2,304,341;  US  7,594,875;  CA  2,304,043;  CA  2,529,276;
CA 2,633,628; CA 2,633,056; US 7,594,875; CA 2,498,701; CA 2,495,136; CA 2,488,600

«
...
42
43
44

Summary of Contents for LEGACY PS 73161













































Reviews:

No comments

Related manuals for LEGACY PS 73161

Brand: Baker Instrument Company Pages: 24

Brand: Dabi Atlante Pages: 102

Brand: Landoll Pages: 70

Brand: Park Central Pages: 20

Brand: STARPLAY Pages: 12

Brand: Eagle Pages: 38

Brand: Fluke Pages: 128

Tilloll 875 Series

Brand: Landoll Pages: 64

Easy Access Stairs R5

Brand: Playcraft Pages: 5

FIELD TEST DEVICE - sigfox RC2

Brand: Adeunis RF Pages: 99

Brand: XZeal Pages: 24

Brand: pewag Pages: 6

Brand: Petzl Pages: 26

Brand: ACME Pages: 5

SHOR BASE MFX0360

Brand: Magicfx Pages: 21

Brand: C-Dax Pages: 38

NavBoard FlipLite NB-FL02 Series

Brand: S&S Pages: 2

Brand: Sirona Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands