PLAYSTAR LEGACY PS 73161, Safety Manual & Building Instructions

Page: 31 / 44

31
ANCHORING
At locations shown screw Playset Anchors into ground by hand (a long screwdriver will help).
Use the anchor as a drill guide and drill a ¹⁄₄ " hole 1" deep into the board. Attach with ³₈ " x 1 ¹⁄₂ " lag screw and ³₈ " washer.
Gold Option
(6) Anchors
(6)
³⁄₈
"
x 1
¹⁄₂
"
Lag Screw
(6)
³⁄₈
"
Washers
Note: If soil conditions permit anchors to be pulled out easily, such as in sandy soil
conditions, cementing is required. If your ground is too hard to screw in the
anchors, or you are having trouble lining up anchor with existing hole in tower,
you can remove the earth with a shovel. Install the anchors and compact the
earth as you replace it. Anchors must be placed below the level of the shock-
absorbing surfacing material to prevent tripping or injury resulting from a fall.
Reminder: Be sure to install proper shock-absorbing surfacing material. Refer to the
Safety Guide at the beginning of this plan.
1
2
3
4
5
6