PLAYSTAR LEGACY PS 73161, Safety Manual & Building Instructions

Page: 28 / 44

28
Step 3 Cont.:
Make sure brace is square to beam. Using the
brace as a template, drill a
³⁄₈
" hole completely
through beam.
(Fig. 3)
Secure the Sturdy-Frame Brace to the beam with
a
³⁄₈
" x 3½" hex bolt,
³₈
" washer and
³₈
" lock nut.
Locate the hole on the 2" x 4" board of tower assembly where the Swing
Station Assembly will be attached.
Position Swing Station Assembly against tower and secure with one ³₈ " x 5"
hex bolt, washers and lock nut as shown.
Items for
STeP 4:
(1)
³₈
" x 5" hex bolt
(2)
³₈
" washers
(1)
³₈
" lock nut
Fig. 3
Drill